S/N | Description | Flashing process of Status Indicator |
1 | Systems check during power-on: successful system check | Alternative flashing in red, green and blueonce |
2 | Failed system check | Slow pulsing in red |
3 | GPS signal acquired | Slow pulsing in green |
4 | No sufficient GPS signal | Slow pulsing in yellow |
5 | P Mode (Professional) after motor startup | On in yellow |
6 | N Mode (Normal) and other auxiliary modes | On in green |
7 | E Mode (Easy Control) | On in white |
8 | Landing gear operation | Quick flashing in yellow |
9 | Shutdown | Quick flashing in white |
10 | Code matching of remote controller | Slow pulsing in blue |
11 | Alarm of low battery or loss of signal of remote controller | Slow pulsing in red |
12 | Successful mode switching; successful task execution; successful sensor calibration | Flashing in green |
13 | In a no-fly zone where take-off is forbidden | Slow pulsing in red |
LED signals info description Print
Modified on: Fri, 13 Jul, 2018 at 4:52 PM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.